Circular Saw in Case 85 mm

With a massive 450 Watt, this small, easy to handle and almost vibration-free Batavia electronic plunge cut circular saw will cut everything in situ. Thanks to the high rotational speed of 4000 rpm, the cut in the material is perfect and free of nicks and burrs – a more or less “surgical” quality.

Applications:

• Laying or repairing parquet, laminates, tiles, linoleum or any other flexible floor coverings, as well as plastics, wall tiles, aluminium etc
• Cutting slits in internal walls for pipe laying
• Cutting pipes in copper or plastics for plumbing etc up to 150 mm diameter.

The 230 V motor provides a power of 450 W and a speed of up to 7000 rpm. The patented electronics developed by Westfalia ensure a graduated start-up of the blade, which permits the safe and accurate guidance of the machine on the material. Overload protection including red warning lamp when the cutting speed is too high.

Cutting depth is continuously adjustable from 0 to 27.0 mm. This makes it easy to cut things, even on the floor, without damaging the surfaces below. This makes it practically unnecessary to use a table or workbench. The workpiece cannot bend or break, since it is fully supported, and the saw blade does not need to cut right through the material, or only to a very slight degree.

Technical Data:

• Motor: 230V, 450W up to 4000rpm
• 2m VDE Cable
• Cutting depth: 0-27mm
• Max blade size: 85 mm / 50 mm
• Bore diameter: 10 mm
• Parallel Edge Guide 170 mm

Contents:

• 1 x 24 TCT blade
• 1 x Diamond blade (85mm diam., G50)
• 2 x HSS blades 85 mm diam.
• 1 x V shoe
• 1 x Standard shoe(on the machine)
• 1 x Parallel Edge Guide
• 1 x adapter for dust extraction

Supplied in a carrying case.

Article No. 951467: 2 x HSS blade 85 mm, 80 teeth
Article No. 951475: 2 x HSS blade 85 mm, 24 teeth
Article No. 951624: 2 x Diamond blades, G50         
Article No. 951632: 2 x Diamond blades, 85 mm