Scroll Saw DS 230/E

The right tool for tricky jobs. Model making, toy making and fine mechanical work. Cuts softwood up to 40 mm, hardwood up to 10 mm, plastics (including computer board) up to approx. 4 mm and non-ferrous metals up to 2 mm. Very sturdy saw bow made from cross-ribbed diecast aluminium (overhang 300 mm). Blade guide with integrated blower. Height-adjustable head (3 positions) which triples the service life of the saw blades after shortening twice (also uses teeth in the central range) and in the lowest position you can work more precisely using a blade shortened by 60 mm. Surface milled work plate (diecast aluminium 160x160mm). Body made from ABS with sliding door on side and storage compartment for saw blades. VDE-tested 220-240 Volt motor (85 Watt). Low noise, wear-resistant drive with a toothed belt (on ball bearings). Electronic stroke speed control from 150-2500/min. Longitudinal and angle stop with scale divisions.